HIKVISION DS-K1T341B Series User Manual

The client will calculate the aendance data of the previous day from the me you have
congured.
Manually Calculate Aendance Data
You can manually calculate aendance data by seng condions including aendance me,
department, aendance status, etc.
Steps
1. Enter the Time & Aendance module.
2. Click Aendance Stascs → Calculaon .
3. Set the start me and end me to dene the aendance data range.
4. Select the department from the drop-down list.
5.
Oponal: Set other condions, including name and person ID.
6. Check
aendance status (supports mul-selecon).
7. Click Calculate.
Note
Only the aendance data within three months can be calculated.
8. Oponal: Perform one of the following operaons.
Correct Check-
in/out
Select one person, click Correct Check-in/out to add check-in/out
correcon.
Select Items to
Display
Click on the upper right corner, or right click the table header of the
aendance data list to customize the items to be displayed in the list.
Adjust Items
Sequence
Click one item (except Person ID) and move the mouse to customize the
sequence of dierent items.
Generate Report Click Report to generate the aendance report.
Note
The report items will be displayed in the sequence you have set.
Export Report Click Export to export aendance data (CSV le) to local PC.
Note
The report items will be displayed in the sequence you have set.
DS-K1T341B Series Face Recognion Terminal User Manual
152

HIKVISION DS-K1T341B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341B Series
Category	Touch terminals
Language	English