To Next Page

To Previous Page

Authencaon by the access control device and by the client. When the person swipes

the card on the device, a window will pop up. You can unlock the door via the client.

Figure 8-9 Remotely Open Door

Note

You can check Oine Authencaon to enable the super password authencaon when

the access control device is disconnected with the client.

Local Authencaon and Super Password

Authencaon by the access control device and by the super password.

4) Select the added person/card group in the le list below and it will be added to the Selected

list on the right as the

authencaon group.

5) Click the added authencaon group in the right list to set authencaon mes in the Auth

Times column.

Note

• The

authencaon mes should be larger than 0 and smaller than the added personnel

quanty in the personnel group.

• The maximum value of authencaon mes is 16.

6) Click Save.

Note

• For each access control point (door), up to four

authencaon groups can be added.

• For the authencaon group of which authencaon type is Local Authencaon, up to 8

person/card groups can be added to the authencaon group.

• For the

authencaon group of which authencaon type is Local Authencaon and Super

Password or Local Authencaon and Remotely Open Door, up to 7 person/card groups can

be added to the

authencaon group.

7. Click Save.

DS-K1T341B Series Face Recognion Terminal User Manual

112

HIKVISION DS-K1T341B Series User Manual

Questions and Answers: