HIKVISION DS-KH9510-WTE1(B) - Page 52

Figure 3-5 System Maintenance
●
Click Reboot and the system reboot dialog box pops up. Click Yes to
reboot the system.
●
Click Restore Default Sengs to restore the default parameters.
●
Click Restore All to restore all parameters of device and reset the device
to inacve status.
Note
○
Click Restore Default Sengs, all default sengs, excluding network
parameters, will be restored.
○
Click Restore All, all default sengs, including network parameters,
will be restored. The device will be reset to inacvated status.
●
Click Import Conguraon File and the import le window pops up.
Select the path of remote conguraon les. Click Open to import the
remote conguraon le. The conguraon le is imported and the
device will reboot automacally.
●
Click Export Conguraon File and the export le window pops up. Select
the saving path of remote conguraon les and click Save to export the
conguraon le.
Video Intercom 9 Series Indoor
Staon Conguraon Guide
41