HIKVISION DS-KH9510-WTE1(B) - Fit to Screen

Figure 2-23 Sync Time
Set the synchronizing interval, enter the IP address/domain of NTP server and
port No., and select the me zone.
Note
The default unit of synchronizing interval is minute.
2.7 Sound Sengs
You can set the ringtone, ring duraon, call forwarding me, volume of microphone
and loudspeaker and enable/disable touch sound on call sengs page.
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Steps
1. On the main page of the device, tap Sengs → Call Sengs to enter the call
sengs page.
Video Intercom 9 Series Indoor
Staon Conguraon Guide
23