HIKVISION DS-KH9510-WTE1(B) - 2 Local Operation; 2.1 Activate Indoor Station

2 Local Operaon
2.1 Acvate Indoor Staon
You can congure and operate the indoor staon aer creang a password for the
device acvaon.
Steps
1. Power on the device. It will enter the
acvaon page.
Figure 2-1 Acvate Indoor Staon
2. Create a password and conrm it.
Note
You can tap to enable or disable password reveal.
3. Tap OK to acvate the indoor staon.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special characters)
in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the
password monthly or weekly can
beer protect your product.
Video Intercom 9 Series Indoor Staon Conguraon Guide
2