HIKVISION DS-KH9510-WTE1(B) - 3.4.2 Video Intercom; Time Parameters

Note
●
The new password and conrm password should be idencal.
●
Aer eding the password of device, click refresh buon from the device
list, the added device will not be there. You should add the device again
with new password to operate the remote conguraon.
RS-485
Click RS485 to enter the RS-485 sengs page. You can view and edit the
RS-485 parameters of the device.
Figure 3-7 RS-485 Sengs
Note
For indoor staon and main staon, there are 3 choices for the working
mode: transparent channel, disable, and custom.
3.4.2 Video Intercom
Click Video Intercom on the remote conguraon page to enter the video intercom
parameters sengs: Device Number Conguraon, Time Parameters, Password,
Zone Conguraon, IP Camera Informaon, and Volume Input and Output
Conguraon, and so on.
Time Parameters
Video Intercom 9 Series Indoor Staon Conguraon Guide
43