HIKVISION DS-KH9510-WTE1(B) - 3.3 System Configuration; 3.4 Remote Configuration; 3.4.1 System

3.3 System Conguraon
You can congure the video intercom parameters accordingly.
Steps
1. Click Maintenance and Management → System
Conguraon → Acs and
videoIntercom to enter the system conguraon page.
2. Enter the required informaon.
Ringtone
Click ... and select the audio le from the local path for the ringtone of indoor
staon. Oponally, you can click for a tesng of the audio le.
Max. Ring Duraon
Input the maximum duraon of the ringtone, ranging from 15 seconds to 60
seconds.
Max. Speaking
Duraon with Indoor Staon
Input the maximum duraon of speaking with the indoor staon, ranging from
120 seconds to 600 seconds.
Max. Speaking Duraon with Door Staon
Input the maximum duraon of speaking with the door staon, ranging from
90 seconds to 120 seconds.
3. Click Save to save the
sengs.
3.4 Remote
Conguraon
In the device list area, select a device and click to enter the remote conguraon
page.
3.4.1 System
Click System on the remote conguraon page to display the device informaon:
Device Informaon, General, Time, System Maintenance, User, and RS-485.
Video Intercom 9 Series Indoor
Staon Conguraon Guide
38