HIKVISION DS-KH9510-WTE1(B) User Manual

Figure 3-21 Device Network Congure
2. Select the Device Type according to your need.
3. Set the Community No., Building No., Unit No., Floor No. and Room No.
4. Enter the main staon IP address, (main) door staon IP address, SIP server IP
address, management center IP address, and doorphone IP address.
5. Select the main door
staon type from the drop-down list.
6. Click Save to enable the sengs.
Note
●
Aer adding main staon IP Address, the linkage between indoor staon and
main staon can be realized.
●
Aer adding the door staon IP Address, the video intercom between indoor
staons of same building can be realized.
●
Aer adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor
staons of dierent building, calling indoor
staon from outer door staon and video intercom between management
center and indoors.
●
Aer adding management center IP Address, the events can be uploaded to the
management center.
●
For indoor extension, only parameter about the main indoor
staon should be
congured.
3.5 Person Management
Video Intercom 9 Series Indoor Staon Conguraon Guide
54

HIKVISION DS-KH9510-WTE1(B) Specifications

General

Brand	HIKVISION
Model	DS-KH9510-WTE1(B)
Category	Intercom System
Language	English