Note
Indoor Extension only supports admin password and arm/disarm password.
5. Tap Sengs → Basic Sengs to enable Scene Mode Switching without Password
and enter the arm/disarm password. There is no need to enter the password
during scene mode switching.
2.5.3 Modify Registraon Password
You can change the SIP registraon password.
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Steps
1. On the main page of the device, tap Sengs → Advanced Sengs → Indoor
Staon Sengs to enter the sengs page.
Note
Admin password is required to enter the advanced sengs page.
Figure 2-20 Indoor Staon Sengs
2. Tap Registraon Password to pop up the SIP registraon password sengs dialog
box.
3. Create a new password and conrm it.
Video Intercom 9 Series Indoor
Staon Conguraon Guide
20