HIKVISION DS-KH9510-WTE1(B) User Manual

Figure 2-19 Password Sengs
2. Tap Unlock Password, Arm/Disarm Password, or Duress Code to pop up the
password
sengs dialog box.
Unlock Password
Enter the unlock password and room No. on the door
staon to open the
door.
Arm/Disarm Password
Create an arm/disarm password before conguring alarm parameters.
Arm or disarm the zone for the indoor staon by entering the arm/disarm
password.
Note
Arm/Disarm sengs page is hidden by default. Tap Sengs → Advanced
Sengs to enable Zone Alarm funcons, and you can edit the alarm
parameters.
Duress Code
When you are hijacked and forced to open the door, you can enter the duress
code. An alarm will be triggered to nof y the management center secretly.
Note
The duress code and the unlock password cannot be the same.
3. Create a new password and conrm it.
4. Tap OK to save the
sengs.
Video Intercom 9 Series Indoor
Staon Conguraon Guide
19

HIKVISION DS-KH9510-WTE1(B) Specifications

General

Brand	HIKVISION
Model	DS-KH9510-WTE1(B)
Category	Intercom System
Language	English