NVR User Manual 061220NA 159
• Password: Set the password for the user account.
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong password
of your own choosing (using a minimum of eight characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. We also recommend that you
reset your password regularly. Especially in high security systems, resetting the password
monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
• Level: Set the user level to Operator or Guest. Different user levels have different operating
permission.
- Operator: The Operator
user level has permission for Two-way Audio in Remote Configuration
and all operating permissions in Camera Configuration by default.
- Guest: The Guest user has no permission for Two-way Audio in Remote Configuration and only
has the local/remote playback in the Camera Configuration by default.
• User’s MAC Address: The MAC address of the remote PC that logs onto the NVR. If it is configured
and enabled, it allows only the remote user with this MAC address to access the NVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added
new user will be displayed on the list.
Figure 246, Added User Listed in User Management Interface
5. Select the user from the list and then click the button to enter the Permission settings interface.
To Next Page
Loading...
Need help?
General
