NVR User Manual 061220NA 160
Figure 247, User Permission Settings Interface
6. Set the operating permission of Local Configuration, Remote Configuration, and Camera Configuration
for the user.
• Local Configuration
- Local Log Search: Searching and viewing NVR logs and system information
- Local Parameters Settings: Configuring parameters, restoring factory default parameters, and
importing/exporting configuration files
- Local Camera Management: Add, delete, and edit IP cameras
- Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),
upgrading system firmware, clearing I/O alarm output.
- L
ocal Shutdown Reboot: Shut down or reboot the NVR
• Remote Configuration
- Remote Log Search: Remotely view logs that are saved on the NVR
- Remote Parameters Settings: Remotely configure parameters, restore factory default
parameters, and import/export configuration files
- Remote Camera Management: Remote add, delete, and edit IP cameras
- Remote Serial Port Control: Configure RS-232 and RS-485 port settings
- Remote Video Output Control: Sening remote button control signal
- Two-Way Audio: Realize two-way radio between remote client and NVR
- R
emote Alarm Control: Remotely arm (notify alarm and exception message to remote client) and
control the alarm output
- Remote Advanced Operation: Remotely operate HDD management (initialize HDD, set HDD
property), upgrade system firmware, clear I/O alarm output
To Next Page
Loading...
