NVR User Manual 061220NA 37
Figure 38, Camera Password Configuration
3. Click OK to save the settings and exit the interface.
Configuring Customized Protocols
Purpose
To connect network cameras that are not configured with standard protocols, you can configure
customized protocols for them.
1. Click the Protocol button in the Custom Adding IP Camera interface to enter the protocol management
interface.
Figure 39, Protocol Management Interface
NOTE: There are 16 customized protocols provided in the system, you can edit the protocol
name and choose whether to enable the sub-stream.
2. Choose the protocol transmission type and choose the transfer protocols.
NOTE: Before customizing the protocol for the network camera, you have to contact the
To Next Page
Loading...
Need help?
General
