194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 63
Mobilizing the patient
Management of Wi-Fi connection profiles
1. Press Parameters on the GCI.
2. Press Technician Access.
3. Enter the code 9004 and confirm by pressing OK.
4. Press Wifi Profile Management.
5. Check that the Wi-Fi is active. Activate if
necessary.
There are two configuration modes: Scan and
Manual.
Configuration in “Scan” mode
1. Press Scan networks.
2. Select a profile in the list
3. Enter the parameters.
a. Name (Name)
b. SSID
c. Sec Type (Sec Type)
d. Auth Type (Auth Type)
e. Eap Type (Eap Type)
f. User name (User name)
g. Password (Password)
Information on the maximum number of characters:
• Name: 32 characters.
• SSID: 32 characters.
• User Name: 32 characters.
• Password: 64 characters.
4. Press Save to save the settings
To Next Page
Loading...
Need help?
General
