HI 800 101 HIMatrix Engineering Manual
The shield clamp may not be used as a strain relief
for the connected cable.
3.5.4 EMC Protection
Windows in the case in which the device is installed are permitted.
Increased EMC interferences outside the standard limit values require appropriate meas-
ures.
3.5.5 ESD Protection
Only personnel who have the knowledge of ESD protective measures are permitted to carry
out system modifications/upgrades to the system wiring.
An electrostatic discharge can damage the built-in elec-
tronic components.
• Touch an earthed object to discharge any static in your body.
• When carrying out the work, make sure to use an ESD protected working area and
wear an earthing strip.
• When the module is not in use, ensure it is protected from electrostatic discharges,
e.g. keep it in its packaging.
18 of 61
To Next Page
Loading...
