Safety Notes
4
Quick Start Manual
Safety Notes
Safety Symbols
This manual contains information and warnings essential for safe
operation of the product and for maintaining it in safe operating
condition. Before using the product, be sure to carefully read the
following safety notes.
This product is designed to conform to IEC 61010 Safety
Standards, and has been thoroughly tested for safety prior to
shipment. However, mishandling during use could result in
injury or death, as well as damage to the product. Be certain
that you understand the instructions and precautions in the
manual before use. We disclaim any responsibility for acci-
dents or injuries not resulting directly from product defects.
In the manual, the symbol indicates particularly
important information that the user should read before
using the product.
The symbol printed on the product indicates that the
user should refer to a corresponding topic in the manual
(marked with the
symbol) before using the relevant
function.
Indicates a double-insulated device.
Indicates AC (Alternating Current).
Indicates DC (Direct Current).
Indicates both DC (Direct Current) and AC (Alternating
Current).
Indicates a grounding terminal.
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
To Next Page
Loading...
