7.2 Using a Printer (Option)
116
Quick Start Manual
9670 PRINTER (option)
The following items are required to use the 9670 PRINTER.
• 9670 PRINTER (BL-80RS II, made by SANEI ELECTRIC INC.)
(with 1 roll of thermally sensitized paper supplied)
• 9671 AC ADAPTER (
BL-100W, made by SANEI ELECTRIC INC.)
• 9237 RECORDING PAPER
(thermally sensitized paper 80 x 25 m, 4 rolls)
• 9638 RS-232C CABLE
7.2 Using a Printer (Option)
The instrument can produce hard
copies of the screen on the Model
9670 PRINTER connected to the
RS-232C interface.
• The 9670 PRINTER is automatically initialized by the instru-
ment when connected.
• Note that printers other than the 9670 PRINTER will not work
with this instrument, even if they are thermal printers with an
RS-232C interface.
• Read the operating manuals supplied with the printer for the
operating procedures.
To Next Page
Loading...
