Hioki 3196 - Introduction; Standard Accessories and Options

Introduction
1
2
3
4
5
6
7
8
9
10
11
Introduction
1
Introduction
Thank you for purchasing the HIOKI “3196 POWER QUALITY
ANALYZER”. To obtain maximum performance from the product,
please read this manual first, and keep it handy for future refer-
ence.
• Refer to the Instruction Manual (CD-R version) provided with this
device.
• For current input with this device, a clamp-on sensor (optional) is
required. For details, refer to the instruction manual for the
clamp-on sensor you are using.
• For detailed information on the EN50160, see the Instruction
Manual for EN50160.
Standard Accessories and Options
Checking the contents of the package
When you receive the product, inspect it carefully to ensure that no
damage occurred during shipping. In particular, check the accesso-
ries, panel switches, and connectors. If damage is evident, or if it
fails to operate according to the specifications, contact your dealer
or Hioki representative.
9
458 AC ADAPTER
(
power cord included)
Input Cord Label
(For distinguishing the voltage cord
and clamp-on sensor channels.)
9438-02 VOLTAGE CORD
1 set (8 cords)
(One each red, yellow, blue, and
gray cord, and four black cords.)
Strap
3
196 POWER QUALITY
A
NALYZER
• Quick Start Manual
• Instruction Manual
for EN50160
Software (CD-R)
• Instruction Manual
• Instruction Manual for EN5016
0
• "Down96" Data Download
Application Software
LAN Connector
Cover
9459 BATTERY PACK
(7.2 V, 2700 mAh)