1
2
3
4
5
6
7
8
9
Measurement Preparations
3.1 Connection Procedure
29
Please read the Usage Notes (page 7) before setting up
this instrument.
Measurement Preparations 3
3.1 Connection Procedure
2
7
4
5
6
Install the battery pack
Turning the Instrument On
Connect the Wiring Adapter
(option)
Note: If no Wiring Adapter is used, proceed
to step
5
Connecting the Voltage Cords
(Apply the input cord labels)
Connecting a Clamp-on Sensor
(Apply the input cord labels)
1
Attach the Strap
Note: If not needed, proceed to step 2
3
Connect the AC Adapter and
the power cord
Connect to the lines to be measured
❖ (page 45)
❖ (page 30)
❖ (page 31)
❖ (page 32)
❖ (page 35)
❖ (page 33)
❖ (page 37)
❖ (page 42)
3196
Rear Panel
Top of Instrument
Before connecting to the
lines to be measured, be
sure steps 1 - 7 have been
completed.
Refer to the indicated reference items before installing
and connecting.
To Next Page
Loading...
