Hioki 3196 - Usage Notes

Usage Notes
1
2
3
4
5
6
7
8
9
10
11
Usage Notes
7
Usage Notes
Follow these precautions to ensure safe operation and to obtain
the full benefits of the various functions.
To avoid electric shock
• To avoid electric shock, do not allow the product to get wet,
and do not use it when your hands are wet.
• To avoid electric shock when measuring live lines, wear
appropriate protective gear, such as insulated rubber
gloves, boots and a safety helmet.
• Before turning the product on, make sure the source volt-
age matches that indicated on the product's power connec-
tor. Connection to an improper supply voltage may damage
the product and present an electrical hazard.
• Use only the supplied Model 9458 AC ADAPTER. AC
adapter input voltage range is 100 to 240 VAC (with ±10%
stability) at 50/60 Hz. To avoid electrical hazards and dam-
age to the product, do not apply voltage outside of this
range.
• Turn the product off before connecting the AC adapter to
the product and to AC power.
• For battery operation, use only the HIOKI Model 9459 BAT-
TERY PACK. We cannot accept responsibility for accidents
or damage related to the use of any other batteries.
• Do not use the product where it may be exposed to corro-
sive or combustible gases. The product may be damaged
or cause an explosion.
AC 100 V
to 240 V
Use the 9458 AC
ADAPTER or
9459
BATTERY PACK .
Do not touch with
bare hands.
Do not get wet.
C
heck the voltage
.