1
2
3
4
5
6
7
8
9
11
Parts Names
2.1 Instrument Labels and Functions
21
SYSTEM key
Displays the [SYSTEM] screen (for
selecting display of system settings).
Front Panel Enhanced View
DATA HOLD key
Temporarily stops display of measured values.
Press again to cancel. While recording, display
of the measured value can be stopped for con-
firmation.
Cursor keys
These keys move the cursor on the screen.
Use to scroll the time series graph screen.
DATA RESET key
All measurement data is erased from internal
memory.
Press this key to reset before restarting record-
ing.
EVENT key
Displays the [EVENT] screen (for selecting
events).
VIEW key
Displays the [VIEW] screen (for
selecting an Analysis view).
TIME PLOT key
Displays the [TIME PLOT] screen (for se-
lecting the time plot graph).
START/STOP key
Starts and stops recording.
To start recording, press the DATA RESET
key to reset the data, then press this key.
DF1-DF4 keys (Display Function)
Select a screen to display from the selected screen type: SYSTEM, VIEW, TIME
PLOT or EVENT.
The screen selections are as follows:
[SYSTEM] ......Wiring diagram, Main settings, Event settings, Load/Save, etc.
[TIME PLOT] ..RMS fluctuations, Voltage fluctuations, Harmonic fluctuations,
Flicker display, etc.
[VIEW] ............Waveforms, Vectors, DMM, Harmonic display, etc.
[EVENT] .........List, Monitor, etc.
To Next Page
Loading...
