2.2 Screen Names and Display Elements
26
Quick Start Manual
*1: Screen Selection Display
*2: Internal Operating Status Display
One of [SETTING], [RECORDING] ([WAITING] until preset time to
start measuring), or
[ANALYZING] is displayed to indicate the inter-
nal status of the instrument.
The internal status is changed by pressing to start/stop
recording.
If the preset measurement start time has already passed, measure-
ment starts immediately.
[SYSTEM] [TIME PLOT]
[VIEW] [EVENT]
Indicator Internal status description
Real-time
measure-
ment
Recording
status
[SETTING] When turned on, there is no re-
corded data in the instrument
Possible Preparation for
recording
(not recording)
[WAITING] Waiting until a preset start time to
begin measuring
Possible
[RECORD-
ING]
Recording has started and mea-
surement data is being saved to
the instrument’s internal memory
(and perhaps to a PC Card)
Possible Recording in
progress
[ANALYZ-
ING]
Recording has finished and the
instrument is ready for analysis of
the measurement data in internal
memory
Possible Finished re-
cording
Measurement
starts
Measurement
finished
[SETTING]
[RECORDING] [ANALYZING
Measurement with Specified Time Settings
[SETTING]
[WAITING]
[RECORDING]
[ANALYZ
ING]
Starts measurement at
the measurement start
time.
Finishes measure-
ment at the measure-
ment end time.
To Next Page
Loading...
