Hioki 3196 - Page 71

1
2
3
4
5
6
7
8
9
10
11
Measurement Method
6.2 Change in Power
65
5.
Making 3196 settings (recording settings)
RECORDING
Make the following settings.
Shows the maximum interval that you can record fo
r
using the above settings.
When recording to a PC card:
Insert a Flash ATA card into the PC card slot.
Recorded data is automatically saved to the interna
l
memory at the same time.
You can increase the maximum recording interval b
y
using an ATA Flash card.
Example: When using a 32-MB PC card, the record
-
ing capacity increases about 4 times. A recording
interval of 20 days, 7 hours, and 24 minutes is pos
-
sible.
Setting Item Selections
Rec. Data
Power, MAX/MIN/AVE
Memory Full
STOP
Interval
1 min (5 days, 1 h, 51 m)
Setting Item Selections
Memory Full
LOOP
Auto Save
BINARY
Select item
Select from
pull-down
menu
Confirm