1
2
3
4
5
6
7
8
9
11
Measurement Method
6.4 Monitoring Interruptions
81
4.
Making 3196 settings (recording settings)
RECORDING
Make the following settings.
The above settings indicate the maximum possible
recording period.
When recording to a PC card:
Insert an ATA Flash card into the PC card slot.
Recorded data is automatically saved to the inter-
nal memory at the same time.
You can increase the maximum recording interval
by using an ATA Flash card.
Example: When using a 64 MB PC card, the
recording capacity is increased about 9 times.
When measuring for an identical recording interval
over one month, you can set the interval to 15 s.
Items Settings
Rec. Data
Power, AVE
(You can observe the MAX and
MIN values on the voltage fluctua-
tion graph even if only AVE set-
tings are made.)
Memory Full
STOP
Interval
5 m (31 days)
Items Settings
Memory Full
LOOP
Auto Save
BINARY
Select item
Select from
pull-down
menu
Confirm
When recording data for more than one month:
Make the same setting as described in “When recording to a PC
card:” and turn on the setting for repeated recording (for which
the number of repeated recording operations must be set).
Data is recorded in files on a PC card, each containing the data
of a one-month period.
For details, See the Instruction Manual (CD-R version).
To Next Page
Loading...
