6.5 Detecting Transients and Waveform Distortion
90
Quick Start Manual
5.
Making 3196 settings (recording settings)
RECORDING
Make the following settings.
Shows the maximum interval that you can record
with the settings above.
When recording to a PC card:
Insert an ATA Flash card into the PC card slot.
Recorded data is automatically saved to the inter-
nal memory at the same time.
You can increase the maximum recording interval
by using an ATA Flash card.
Example: When using a 64 MB PC card, the
recording capacity is increased about 9 times.
When measuring for an identical recording interval
over one month, you can set the interval to 15 s.
Items Settings
Rec. Data
Power, AVE
(You can observe the MAX and
MIN values on the voltage fluctua-
tion graph when AVE is set.)
Memory Full
STOP
Interval
5 m (31 days)
Items Settings
Memory Full
LOOP
Auto Save
BINARY
Select item
Select from
pull-down
menu
Confirm
To Next Page
Loading...
