Hioki BT3562-01 - Page 151

8.6 Message Reference
147
8
Chapter 8 RS-232C/GP-IB Interfaces
Set and Query the Trigger Source
Syntax
Command
:TRIGger:SOURce <IMMediate/ EXTernal>
Query
:TRIGger:SOURce?
Response <IMMEDIATE/ EXTERNAL>
IMMEDIATE.....Internal triggering
EXTERNAL......External trigger source. Triggering by TRIG key,
TRIG
terminal or ∗TRG command.
Description
Command Selects the trigger source.
Query Queries the trigger source selection.
Example
Command
:TRIG:SOUR IMM
Sets the trigger source to internal triggering.
Query
Response
:TRIG:SOUR?
IMMEDIATE
The trigger source is set to internal triggering.
Enable/Disable and Query Trigger Delay
Syntax
Command
:TRIGger:DELay:STATe <1, 0, ON or OFF>
Query
:TRIGger:DELay:STATe?
Response <ON or OFF>
ON ........ Trigger delay enabled
OFF....... Trigger delay disabled
Example
Command
:TRIG:DEL:STAT ON
Enables trigger delay.
Query
Response
:TRIG:DEL:STAT?
ON
Trigger delay is enabled (ON).