Hioki DM7275-01 - Page 108

106
Preparing to Use an Interface (Connection and Settings)
Settings
IP Address This address is used to recognize individual devices that are connected to a
network. Use an address that is not already in use by another device.
SubnetMask
This setting is used to divide the IP address into an address that indicates the
network and an address that indicates the device. Use the same subnet mask
setting as other devices on the same network.
DefaultGateway Whenconnectingtheinstrumenttoanetwork
When the computer being used (or the device you are using to communicate with
the instrument) is on a different network than the network to which the instrument
is connected, specify a device to serve as the gateway by setting its IP address.
If the instrument is on the same network as the computer, you should generally
use the same default gateway setting as the computer.
When connecting the instrument to a single computer or when not using a
gateway
Set the IP address to 0.0.0.0.
Port Specify the TCP/IP port number to use for communications command connections.
w ww . . co m
information@itm.com1.800.561.8187