Hioki DM7275-01 - X84; Installation Instructions

Appx.17
Rack Mounting
Installation instructions
Be careful not to lose the parts removed from the instrument as you may need to use them again.
WARNING
Topreventdamagetotheinstrumentandelectricshock,observethefollowing
precautions when choosing screws:
•
Wheninstallingtherack-mountingbracketsonthesidesoftheinstrument,
usescrewswithanominallengththatdoesnotexceedthethicknessofthe
bracketbymorethan3.5mm(sothatthescrewdoesnotprotrudeintothe
instrumentbymorethan3.5mm).
•
Whenremovingtherack-mountingbracketsandrestoringtheinstrument
toitsbench-topconguration,usethescrewswithwhichtheinstrument
shippedatthetimeofpurchase(feet:M3×8mm;sides:M4×6mm).Ifthose
screwsarelostordamaged,pleasecontactyourauthorizedHiokidistributor
or reseller.
When installing the instrument in a rack, use a commercially available shelf or other suitable part
to ensure adequate strength.
(1)
Remove the feet on the bottom of the instrument and the screws from the side
covers.
Screws (bottom: four M3 × 8 mm screws; sides: four M4 × 6 mm screws)
1 2
10
9
8
7
6
5
4
3
2
1
Appx.
索索
w ww . . co m
information@itm.com1.800.561.8187