Hioki DM7275-01 - Configuring External Input and Output

136
Conguring External Input and Output
11.4 ConguringExternalInputandOutput
This section describes how to congure settings related to external input and output.
Settings related to input
Trigger source:
EXTERNAL
p. 39
Input lter: p. 136
Settings related to
output
• “4.3 BIN Measurement (Using Multiple Judgment Standards)” (p. 57)
• “6.3 Contact Check” (p. 71)
• “EOM signal output type” (p. 137)
• “12 Printing” (p. 143)
Input lter
The instrument’s lter function provides an effective way to eliminate chatter when connecting a
foot switch or other device to the TRIG and PRINT signals.
(Measurement screen) MENU >
EXTI/O
1 2
(Default setting:
OFF)
3
Set the response time and touch ENTER.
˄ Increases the value by 1.
˅ Decreases the value by 1.
CLR Deletes all characters.
CANCEL Cancels the setting and returns to
the previous screen.
Valid setting range: 50 ms to 500 ms
(Default setting: 50 ms)
w ww . . co m
information@itm.com1.800.561.8187