94
Resetting the Instrument (Reverting the Instrument to Its Factory Settings)
Listofdefaultsettings
Parameter Default setting
Measured value display V
Range switching AUTO
Input resistance switching 10 M
Ω
Number of display digits selection 7.5 digits
Integration time 10 PLC (MEDIUM)
Smoothing function OFF
Number of averaging iterations: 4
Trigger Source: INTERNAL
Number of measurements: 1 per trigger
Delay: PRESET
MANUAL time: 0 ms
NULL OFF
NULL value: 0 V
Temperature compensation OFF
Temperature coefcient: 0 ppm/°C
Reference temperature: 20°C
Scaling OFF
A
: 1
B
: 0
Unit: V
Contact check OFF
Threshold: 1 nF
Contact check integration time: 10 ms
Comparator OFF
Upper limit and lower limit values: 0 V, ON
HIGH judgment tone: OFF
IN judgment tone: OFF
LOW judgment tone: OFF
Number of tones: 2
Judgment delay: OFF
Number of judgments: 2
BIN OFF
Upper limit and lower limit values: 0 V
Absolute value judgment OFF
Auto-hold OFF
Hold range: 0.1% of range
Panel save/panel load NULL value saving: ON
Label display OFF
Label: None
Data output Automatic data output: OFF
Output at judgment: ALL
Measurement data: V°C
Time and date: OFF
Key lock OFF
Backlight 80% brightness
Power supply frequency AUTO
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
