Hioki DM7275-01 - Input Test;Output Test

138
Input Test/Output Test
11.5 InputTest/OutputTest
In addition to switching output signals on and off manually, you can view input signal status
information on the instrument’s screen.
(Measurement screen) MENU >
EXTI/O
>
EXTI/OTEST
1
Touchthesignalyouwishtooutput.
Check the connected device to verify
that the signal is being output from the
instrument.
2
Input a signal from the connected device.
The corresponding indicator will turn green
to indicate the signal being input to the
instrument.
w ww . . co m
information@itm.com1.800.561.8187