Hioki DM7275-01 - Page 39

34
Connecting the Measurement Cables (Measurement Target)
L4930ConnectionCableSet+L4936BusBarClipSet
1
GriptheL4936asshowntotheleft.
2
Opentheclipbydepressingasyou
wouldtheplungerofasyringe.
Black
Red
+
−
3
Connect,takingcaretoalignthe
measurement cable colors with the
measurementtarget’spolarity.
The clip will close when you release
your ngers.
1 2 3
Toapplythecliptoathicktarget:
1
Rotatetheclip’slowerjaw.
2
Lowerthelowerjaw.
3
Rotatetheclip’slowerjawinthe
opposite direction.
In this conguration, the clip can be applied to a measurement target of 30 mm or less.
w ww . . co m
information@itm.com1.800.561.8187