4.4 Step Voltage Test
100
5. The test voltage rises at regular intervals
and the test stops automatically.
The last data is held and displayed.
( lights up.)
Actual output
voltage
Elapsed time at completion
Last resistance
measurement
• While [
TC
] is on (temperature compensa-
tion mode), STEP cannot be selected.
Press the key to turn off the [
TC
]
indicator.
• To view the set voltage during measure-
ment, press the key. The set voltage
is displayed for approximately 2 seconds.
• After the test, pressing the key
switches between the last output voltage
and the test voltage.
• When the instrument is in the step voltage
test mode, auto power off is disabled.
To Next Page
Loading...
