Hioki IR3455 - Entering and Saving; Measured with External Thermometer and Hygrometer

6.3 Entering Temperature and Humidity Measured with
External Thermometer and Hygrometer
132
6.3.1 Entering and Saving
Procedure
1. Press the key in standby state.
The temperature will blink.
2. Enter temperature using the
keys.
keys: Move the cursor.
keys: Raise and lower.
3. Press the key.
The humidity will blink.
When [TC] is on, the instrument returns to
the standby state without indicating humid-
ity.
Entering Temperature and Humidity