6.3 Entering Temperature and Humidity Measured with
External Thermometer and Hygrometer
1
2
3
4
5
6
7
8
9
10
11
付録
索引
133
4. Enter humidity using the
keys.
keys: Move the cursor.
keys: Raise and lower.
5. Press the key.
The instrument holds the entered tem-
perature and humidity values.
• Even if humidity is held, when the
temperature sensor is connected, the
humidity is not displayed
• When resistance and current values are
still in memory or when the instrument is
in the step voltage test mode, the
temperature and humidity indications are
turned off after being entered and the time
lights up.
• If the key is pressed when the
temperature and humidity indications are
blinking, the instrument returns to the
standby state before they are entered.
To Next Page
Loading...
