Hioki IR3455 - 6 Other Functions; Changing and Checking Interval Setting for PI Calculation; Changing Interval Setting

6.1 Changing and Checking Interval Setting for PI Calcu-
lation
1
2
3
4
5
6
7
8
9
10
11
付録
索引
125
Two intervals required to display the PI value may be
changed to user-set intervals.
Selectable range: 1 min. to 30 min.
(Default t1=1 min., t2=10 min.)
6.1.1 Changing Interval Setting
Procedure
1. Press the key several times while
in standby state to display PI.
2. Press the key.
The first interval blinks.
([t1] lights up.)
3. Set the timer using the key.
Other Functions 6
6.1 Changing and Checking Inter-
val Setting for PI Calculation