Hioki IR3455 - Connecting the AC Adapter

2.1 Supplying Power
1
2
3
4
5
6
7
8
9
10
11
付録
索引
45
2.1.3 Connecting the AC Adapter
• Optional 9753 AC ADAPTER can be used.
• When the AC adapter is connected to the instrument, you
can charge the battery pack, communicate with a PC, per-
form temperature measurement, and edit the settings.
However, you cannot measure insulation resistance, leak-
age current or voltage.
Procedure
• Turn the instrument off before connect-
ing the AC adapter to the instrument
and to AC power.
• Use only the specified Model 9753 AC
ADAPTER. AC adapter input voltage
range is 100 V to 240 V AC at 50 Hz/60
Hz. To avoid electrical hazards and dam-
age to the instrument, do not apply volt-
age outside of this range.
• To avoid electrical accidents and to
maintain the safety specifications of
this instrument, connect the power cord
provided only to an outlet.
The AC adapter cannot be used when
performing measurement using instrument
leads.
1
2 Move the shutter.
3
4