2.1 Supplying Power
46
1. Insert the power cord into the AC
adapter.
2. Move the shutter of the instrument to
reveal the AC adapter terminal.
3. Insert the output cable of the AC adapter
into the AC adapter terminal.
4. Make sure that the commercial power
source voltage matches the rated supply
voltage of the AC adapter. Insert the
plug into the AC outlet.
When the AC adapter is connected to the instrument,
power is supplied from the AC adapter.
When both the battery and the AC adapter are con-
nected to the instrument, the battery is not used.
If the battery pack is installed, when the AC adapter is
connected to the instrument, power of the instrument is
automatically turned on and charging of the battery pack
begins.
To Next Page
Loading...
