Hioki IR3455 - Checking Recorded Data

5.2 Checking Recorded Data
118
• The content of a manual record is viewed
on the LCD of the instrument.
• For logging records, only the last value is
viewed on the LCD of the instrument. The
entire record is viewed on a PC using PC
software.
 See 6.4 "Communicating with PC" (page 136).
Procedure
1. Press the key in standby state.
([MEMO No.] must be off.)
[READ No.] lights up and data No. and
data blink.
2. Press the key to choose the
No. of the data you wish to view. The
data stored under the number appears.
Press the key to display the
data number of another group.
Example : . .  A0  b0  C0 . .
The recording method of the displayed
record is identified as follows.
5.2 Checking Recorded Data
Data No. is not [Lr] Manual recording data
Data No. is [Lr] Logging recording data