Hioki IR3455 - Viewing Detailed Data of each Step after Step Voltage Test

4.4 Step Voltage Test
1
2
3
4
5
6
7
8
9
10
11
付録
索引
101
4.4.2 Viewing Detailed Data of Each Step
after Step Voltage Test
Procedure
1. When the instrument is in standby state
after step voltage test, press the
key.
will blink and the LCD displays
the details of the step voltage test data.
The first page shows the data at the test
voltage for step 1.
Actual output
voltage at step 1
Blinking
Resistance
at step 1
Elapsed time at
end of step 1
Shows step No.