Hioki IR3455 - Page 109

106
• The table below shows storable data.
Recording
method
Type of data
Data stored in one record:
record 1
Manual
recording
Standard mea-
surement data
(Data when
neither [ TC ] nor
[ STEP ] is on)
Data No., year/month/day/hour/
minute/second (at the end of
resistance measurement),
elapsed time,
temperature,
humidity, test voltage (setting),
actual output voltage, resis-
tance (last) / (after 15 sec.) /
(after 30 sec.) / (after 1 min.),
PI, DAR (1 min/30 s), DAR (1
min/15 s), user-set interval for
PI x 2, and, resistance at user-
set interval x 2
Temperature
compensation
data
(Data when [ TC ]
is on)
Data No., year/month/day/hour/
minute/second (at the end of
resistance measurement),
elapsed time,
temperature, humidity,
test voltage (set value),
actual output voltage, resis-
tance (last),
Reference temperature,
Resistance after compensation,
and, table No.
Step voltage test
data
(Data when
[ STEP ] is on)
Data No., year/month/day/hour/
minute/second (at the end of
test),
Step time, temperature, humid-
ity , test voltage (set value ) ,
actual output voltage x 5, Resis-
tance
x 5
Logging
recording
- - - - - -
year/month/day/hour/minute/
second (at the start of logging
recording), Measuring interval,
temperature, humidity
,
test voltage (set value) ,
actual output voltage x 360
times,
Resistance x 360 times
• In step voltage test resistance measurements,
only the last measurement at the end of each
step is recorded.
• Voltage measurement data cannot be recorded.
• Temperatures are not stored as logging records.