5.2 Checking Recorded Data
122
Detailed Data Screen
Press the key on the representative data screen, after
which will blink and reveal the detailed data screen.
The LCD shows the data from the first step.
Press the keys shown in the table below to switch the indica-
tion.
Indications to be switched Keys used
Switch to data of another step.
key
Insulation resistance
Leakage current
key
Elapsed time to each step
Temperature/humidity
key
Date of measurement
Measurement time
Data
key
Go to the representative data screen.
key
Return to the standby screen.
key
Test voltage setting
Actual output voltage
(Ex. 5.00 kVSET
5.25 kV)
Automatic
switching
As leakage current data is not stored in the
memory, it is calculated again from the
voltage and the resistance to display. The
recalculated data may vary from the
leakage current before recording by ±1%.
When the resistance is 0.00 M, [
- - -
]
appears.
To Next Page
Loading...
