2.1 Supplying Power
1
2
3
4
5
6
7
8
9
10
11
付録
索引
43
Replacement
Procedure
Tools: Phillips screwdriver
1. Turn off power and disconnect the test
leads, AC adapter, and USB cable from
the instrument.
See 2.2 "Turning Power On and Off" (page 50).
2. Loosen the set screw on the rear of the
instrument and remove the battery
cover.
3.
Disconnect the plug of the battery pack
from the connector of the instrument.
Set screw
Remove
Battery cover
To Next Page
Loading...
