4.1 Using Timer
86
3. Press the key to confirm the entry.
If the key is pressed without pressing
the key, the instrument returns to a
standby state with the time unchanged.
When the timer is successfully set, the
[TIMER] indicator lights.
4. Holding down the key for longer
than one second generates a test voltage,
and measurement begins.
At the bottom of the screen, remaining
time to completion of measurement is
displayed.
5. After the set time has elapsed, the
instrument automatically stops measure-
ment.
If the key is pressed, the instru-
ment immediately stops measurement
regardless of the remaining time.
Elapsed time at the completion of mea-
surement is displayed at the bottom of
the screen.
When the timer is set, auto power off is
disabled.
To Next Page
Loading...
