16
Precautions for Use
Measurement precautions
DANGER
Do not use the instrument for measurements on circuits that
exceed the ratings or specications of the instrument.
Doing so could cause damage to the instrument or overheating, resulting
in serious bodily injury.
Do not cause a short-circuit between a wire to be measured
and another wire with the metal part of test leads.
Doing so will cause an arc ash, resulting in serious bodily injury or
damage to the device or other equipment.
Never touch the metal parts on test leads during
measurement.
Doing so could cause serious bodily injury or a short-circuit fault.
IMPORTANT
If the instrument or test leads becomes dirty, that may aect the insulation
resistance measurement. Be sure to clean them if they are dirty.
Shipping precautions
Store the packaging material after unpacking the instrument. Use the original
packaging when shipping the instrument.
To Next Page
