47
Filter Function
3.5 Filter Function
If the indication is unstable, the average of the measurement is shown.
Setting method
Hold down the FILTER key to enable or disable the function.
When the lter function is enabled, [FILTER] appears on the LCD.
FILTER
NOISE
Year
TCPIDARSVDD
TIMER
PI DAR SV
Ramp
DD
USED
COMP
READ
MEMORY
LOGGING
No.
Month Day
hr:min:sec
HID
While [FILTER] is enabled, display update interval is four seconds. But in the
following cases, the interval is one second.
• During 15 seconds after the measurement started
• During 5 to 10 seconds after the measurement range changed
To Next Page
