79
Communicating with PC
5.6 Communicating with PC
Data saved in the memory may be downloaded to a PC and the instrument settings
may be changed from a PC by using the DT4900-01 communication package (option)
and Hioki Sequence Maker*
1
. Used to make a table or graph of the data stored in the
memory or create a report.
When performing communications with the DT4900-01, you cannot measure
insulation resistance, leakage current, or voltage. The DT4900-01 cannot be used
with this instrument to control measurement.
*1. Sequence Maker is an Excel add-in provided by Hioki for no additional charge. It
allows communications and control with the instrument using simple operations
that involve entering communications commands in an Excel worksheet, so no
programming experience is required.
Download data
Control instrument
Install the USB driver on the PC (p. 80)
Install the Sequence Maker on the PC (p. 80)
Installing the Instrument Memory Download Tool (p. 80)
Install the communications adapter in the instrument (p. 81)
Connect the instrument to the PC
To Next Page
