31
Installing the Z3210 Wireless Adapter
2.2 Installing the Z3210 Wireless Adapter
Install the Z3210 wireless adapter (option) in the instrument to allow the use of the
wireless communications function.
See “5.3 Wireless Communications Function (GENNECT Cross)” (p. 74).
WARNING
When removing the battery cover, turn the rotary switch
to OFF and remove the test leads from the object under
measurement.
Failure to do so could cause the user to experience an electric shock.
After installing the Z3210, attach the battery cover and
tighten the screw before using the product.
Using the product without the battery cover result in bodily injury.
Secure the battery cover with the screw attached to the
instrument at the time of shipment.
If the battery cover is secured with other screws, the instrument could
be damaged, resulting in bodily injury. If you have lost a screw or nd
that the screw is damaged, contact your authorized Hioki distributor or
reseller.
CAUTION
Before handling the Z3210, eliminate static electricity on your body
by touching any metallic part, such as a doorknob.
Failure to do so could cause static electricity to damage the Z3210.
To Next Page
