Hioki IR5050 - Page 84

84
Power On Options List
Details Method/Display
Turn HID function on/o󰀨
(When the Z3210
is installed only)
(p. 76)
(Any position)
The HID on/o󰀨 setting is saved in the Z3210.
Fix the voltage measurement
to DCV
(Any position)
Negative voltage notication
function on/o󰀨
(IR5051 only)
(p. 52)
(Any position)
System reset
(p. 118)
(Any position)
Keep insulation diagnostics
function (p. 59) enabled
(Any position)
The user can select whether to keep the insulation diagnostic
function enabled even if the instrument is turned o󰀨.
[USEr SET on] Keep enabled
[USEr SET oFF] Do not keep enabled
HIOKI IR5050A961-00