71
6
Current measurement conditions can be saved and loaded using the panel load function
from the key operations, communications commands, or EXT-I/O.
The instrument can save up to 10 sets of measurement conditions. Saved conditions are
retained even when the instrument is turned off.
Settings that can be saved with the Panel Save function
Saving and Loading Panels
(Saving and Loading
Measurement Conditions)
Chapter 6
• Panel name
• Resistance measurement range
• Measurement speed
• Averaging
• Comparator
• Comparator judgment beeper
• Scaling
• Temperature correction (TC)
• Auto-hold
• Zero-Adjust (Loading of these values can be disabled.)
To Next Page
